600048 Serpent Cobra GTe 1/8 EP 3.0 Kit

Fr. 659.00

inkl. 8 % MwSt. zzgl. Versandkosten

Lagerbestand Planet-rc: Artikel ist nachbestellt  
Gerne bestellen wir diesen Artikel für Dich

Art.Nr.: SERP 600048

Hersteller Info: Serpent

Mehr Artikel   

  • Details
  • Zubehör / Ersatzteile
  • PDF Anleitungen

Details

600048 Serpent Cobra GTe 1/8 EP 3.0 Bausatz

Baukasten, für den Betrieb wird folgendes Zubehör benötigt:

2 Kanal Fernsteuerung
Motor und ESC
2 x Lipo Akku
Räder
Karosserie
Lexanfarbe

Die Serpent Cobra GT ist das beliebteste Auto in GT 1/8 Rennen und das Potenzial des Fahrzeugs wird bei den vielen Rennen unter Beweis gestellt. Vor allem in der GT Szene in Amerika konnte das Fahrzeug dies zeigen. Die neue Cobra GT 3.0 ist die neueste Entwicklungsstufe der Cobra GT-Plattform, die nur mit sehr kleinen Änderungen seit mehr als 5 Jahren erfolgreich ist,

Die GP-Version 3.0 hat bereits die 2016 Winternats Rennen gewonnen!

Neuerungen für die GP und EP-Version:

- Neue Aufhängungsträger vorne und hinten aus Aluminium
- Neue Alu C-Hubs in 6 Grad Version
- Neue Aluminium-Radträger hinten
- Neuer Alu Stoßdämpferhalter vorne und hinten
- Neue untere 4.5 mm Kohlefaser-Stoßdämpferbrücken für vorne und hinten

Serpent Cobra onroad 1/8 scale GT car in 3.0 , electric powered version. Based on the Cobra platform, designed to perform on asfalt tracks. High end racing chassis with 7075-T6 alu chassis, carbon fibre shocktowers, durable spring-steel drivetrain, 3 geardiffs, low longtudinal battery-boxes, captured foam bumper, the works. To complete needs: motor, speedo, wheels/tyres, body and electronics.

Serpent Cobra GTE 3.0 1/8 4wd details

The Serpent Cobra GT is the most popular brand in GT racing and its performance is proven by many big racewins in the highly competitive race scene for GT’s in America. The Cobra GT 3.0 is the latest development stage of the Cobra GT platform, which is running successfully for over 5 year with very small changes only. Below we show the key updates to the GT to continue its strong performance and famous durability.
The Cobra GTE is a combined design effort by Billy Easton and Michael Salven, in cooperation with our USA team-drivers Desoto and Morganti.

Main new features
- New front front and front rear aluminium suspension holders
- New Alu c-hubs in 6 degree version
- New aluminium, uprights for new rear geometry
- New alu shockabsorber risers front and rear
- New 4.5mm carbon shocktowers front and rear

Explaining the new features

New front front and front rear aluminium suspension holders
These are designed to change the piviot pin angle, so the lower wishbones will be more straight, which geomery suits onroad racing better.

New Alu c-hubs in 6 degree version
The new alu c-hubs are needed to make maximum use of the new pivit pin / wishbone angle. CNC-machined from 7075 T6 alumnium, laser engraved and black anodised units.

New aluminium, uprights for new rear geometry
To allow a better onorad geometry we desigend these new CNC machined aluminium uprights, black anodised and laser engraved.

New alu shockabsorber risers front and rear
New alu shocktowers front and rear
The durable machined alu shock-risers front and rear allow for a more onroad aimed angle of the shockabsorber creating more overall grip and more predictable cornering. The new 4.5mm lower carbon fibre shocktowers also accomodate the new shock angles, with a choice of 5 holes for further fine-tuning.

Overall features / specs

Chassisplate
Chassisplate in 3mm 7075 T6 aluminium , with machined pockets to create flex and or make lighter. Kick-up angle on front as need due to the race-rules. Countersunk holes. Slots to locate the front and rear suspension mounts precisely. Angled sides to increase stiffness Laser engraved Cobra GT logo.

Bumper
Captured foam bumper set, with wide foam bumper and strong upper and lower bumper-plate.

Chassis stiffners
Composite stiffner front and rear, to give extra stiffness, but still allow some flex as needed.

Radio-box
Composite radiobox which offers space for the up-right steering-servo, the receiver and sufficient space for the speed-controller. The whole assembly including linkages can be taken off easily and fast in one go, when cleaning the car, or doing maintenance.

The main eyecatchers are the extremely low laydown longtudinal placed battery-packs at each side of the car, being part of the side-guards, securely fastened with a flip-lid, for easy and fast battery changes. The weight low in the car and in the right position, well balanced. The Lipo holders comply with ROAR legal packs / dimensions.

Servo arms and linkages
The servo arms have a splined insert to have the right fit per brand. The linkages runs very clean and tight and are easy to access to modify settings.

Suspension brackets
Beautifully machined 7075 T6 suspension brackets in anodized, laser angraved. Pecision fit for the nylon roll center inserts and pivot balls / pins. The GT 3.0 front suspension brackets make the pivot-pin and lower arm more horizontal, which improves handling and steering.

Steeringblocks assembly
Composite steeringblocks combined with alu 6 dgr C-hubs for precise steering. Spring steel wheel-axles with large size bearings 8x18x5 and 15x21x4 with precision threaded aluminum wheel-hubs with +3 offset . Flanged wheel nuts to guarantee that you will not loose a wheel nut in a race.

Front suspension
Durable oversized lower suspension arms in strong composite nylon. On the lower side the special downstops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.

Front anti-roll bar
The ballraced front anti-roll bar system, consist of a spring steel bend wire, which is guided through the diff-cases and run in ballraced steel adaptors. The wire is linked to the lower suspension arm, with a captured adjustable threaded pivotball, for very precise and low friction operation.

Shocktower and bodymounts front / alu shock-risers
new 4.5mm thick carbon shocktower with 5 upper positioning holes for the shocks and and 6 holes for roll-center positions. 1 centrally located adjustable bodymount , and 2 forward mounted adjustable bodymounts, all with flip-tops. The durable machined alu shock-risers in front allow for a more onroad aimed angle of the shockabsorber creating more overall grip and more predictable cornering.

Angled steering system / servo saver
The bell cranks are angled to reduce the angle of difference between the total caster and steering plane. Therefore you will have less bump steer and a truer steering Ackerman through the entire range of suspension

Ackermann plates
With the design of the steering bell cranks when changing the Ackermann you will not need to adjust your steering tie rods. You simply will only need to adjust your end points on your radio..

Rear suspension arms
Durable oversized lower suspension arms in strong composite nylon. On the lower side the special downstops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.

Rear uprights assembly
New alumnium, black anodised and laser engraved uprights with 3 upper roll-center positions. Strong steel track-rods with L/R threading and strong balljoints to pre-set camber. Spring steel wheel-axles with large size bearings 8x16x5 and 13x19x4 with precision threaded aluminum wheel-hubs with +3 offset . Rubber dustcovers in the rear to protect the cvd system and keep the lubrication inside. Flanged wheel nuts to guarantee that you will not loose a wheel nut in a race.

Rear anti-roll bar
The ballraced front anti-roll bar system, consist of a spring steel bend wire, which is guided through the diff-cases and runs in ballraced steel adaptors. The wire is linked to the lower suspension arm, with a captured adjustable threaded pivotball, for very precise and low friction operation.

Shocktower rear / alu shock-risers
New 4.5mm thick carbon shocktower, integrated into the rear section for extra stiffness, with 5 upper positioning holes for the shocks and 6 holes for roll-center positions. The durable machined alu shock-risers in the rear allow for a more onroad aimed angle of the shockabsorber creating more overall grip and more predictable cornering.

Wingmount and bodymounts rear
Composite rear wing, with strong nylon adjustable rear bodymounts on wide body-support bridge located far enough to the rear, to support the bodies in best way.

Captured pivot pins and balls and bolted hinge pins
All spring-steel hinge pins are either captured or bolted in place and made in spring-steel quality. This insures your chances to finish an hour long main event, while battling for the lead. This relieves stress on the hinge pin when adjusting the kick up, or anti squat. Your pin is free to rotate to any angle without binding.

Shockabsorbers big-bore 16mm
Hard Teflon coated threaded shockbodies with 4mm shock-rods. Black anodized aluminium screw on shock-tops with Serpent laser engraving. Pre-load adjusters with o-rings inside. Shocks use large diameter membrames and large diameter o-rings and bushings to create a supersmooth and leak-proof package. Large diameter pistons are held in place by a nut on the polished shock-rods tops. Open type spring retainer to let dirt out easy.

RCM shock springs
Short type colorcoded shock springs are supplied for the 1st standard set-up Springs are grinded flat top and bottom, and checked individually for tension and length.

Compact geardifferentials
Very compact gear differentials with very smooth metal sintered gears, and steel shaft. Perfect sealing case with special gasket and o-rings. Very light and durable outdrive cups in spring-steel. Hardened spring-steel diff-coupler 13T with connector running in 2 oversized bearings 8x19x6 and ballbearing-13x19x4.

Front and rear cvd-sets
Both front and rear captured driveshafts are being used with CVD system. Durable yet light spring steel engraved driveshafts with hard steel pins.

Spring steel transmission parts
The front and rear thin but strong spring steel cardan shafts connect the differentials with the gearbox section.

Motor mount
Machined 7075 T6 aluminium motor-mount with one-screw fixation and easy slider system. Flex-free and very strong motormount. The space for the motor allows a maximum motor-length of 68mm, which covers most widely used motors.

Oils and grease
The shock-oil, diff oil and some grease is supplied to meet the standard set-up.

Manual and set-up
Full color online manual and USB stick version with easy to follow assembly steps, exploded views for easy spares ordering, a blank and standard set-up sheet for a good start set-up.

Decals
Black and white promo body-decals ; Serpent generic and Cobra GT ones.

Packing
Parts are packed according to the steps explained in the manual.

Service and Support
The Serpent distributor, dealer or agent is your source for more info, but also the Serpent website, Facebook-sites and the Youtube channel provides lots of information.

Needed to complete the car
- radio and receiver
- electric motor
- speedcontroller
- Lipo battery packs x 2
- wheels and tyres
- body and wing
- paint

Zubehör / Ersatzteile

Wir empfehlen Ihnen noch folgendes Zubehör:

Next Stage 7200 50C / 100C 7.4V 2S Lipo Akku Deans

Next Stage 7200 50C / 100C 7.4V 2S Lipo Ak...

Unser bisheriger Preis Fr. 69.90
Jetzt nur Fr. 59.90
Du sparst 14 % /Fr. 10.00

 
Details
IMAX B6AC 80W Lipo Ladegerät - 8A - 12V/230V

IMAX B6AC 80W Lipo Ladegerät - 8A - 12V/230V

Unser bisheriger Preis Fr. 59.90
Jetzt nur Fr. 49.90
Du sparst 17 % /Fr. 10.00

 
Details
C610AC Max Power Lipo Ladegerät 10A /12V/230V

C610AC Max Power Lipo Ladegerät 10A /12V/230V

Unser bisheriger Preis Fr. 79.90
Jetzt nur Fr. 69.90
Du sparst 13 % /Fr. 10.00

 
Details
Next Stage 5200 50C / 100C 7.4V 2S Lipo Akku Deans

Next Stage 5200 50C / 100C 7.4V 2S Lipo Ak...

Unser bisheriger Preis Fr. 49.90
Jetzt nur Fr. 45.90
Du sparst 8 % /Fr. 4.00

 
Details

Kompatible Produkte / Ersatzteile:

PDF Anleitungen

© Planet-rc RC Modellbau Racing Shop